POLAR FLEECE REVERSIBLE BEANIE

INSTRUCTIONS

STEP 1

Cut 2 rectangles measuring the circumference of the head x 22cm from both colours of Polar Fleece. For each colour, join the 2 short edges together, right sides together with 1cm seam allowance creating a cylinder, this is the centre back seam.

STEP 2

Fold each colour in half with the centre back seam at the middle, see diagram. Round off the corners as shown and sew seam.

STEP 3

With right sides together pin both colours of polar fleeces together at the bottom edge and sew the seam, leaving a 10cm opening. Pull the beanie to the right side and hand-sew the opening. Topstitch the beanie 1cm from the bottom edge.